BenQ LU960ST Projector
We recommend
-
In Stock 17£150.00 £125.00ViewSonic WPD-700 Wireless Casting KitIn stockIs Power Required NoInput Type HDMIWeight (kg) 0.02 -
In Stock 163£17.42 £14.52 -
In Stock 13£329.44 £274.53Sapphire Fixed Frame 203x127cm Front Projector Screen 16:10 94 inch SFSC203-10In stockDiagonal in Inches 94Viewing Width (cm) 203Aspect Ratio 16:10Front or Rear Projection FrontSide Border (Per Side) 80mmBottom Border 80mmWeight (kg) 12.30Top Border 80mm -
In Stock 46£452.77 £377.31Sapphire Electric 203x127cm Projector Screen 16:10 95 inch SEWS200RWSF-ATR10In stockDiagonal in Inches 95Viewing Width (cm) 203Aspect Ratio 16:10Front or Rear Projection FrontSide Border (Per Side) 50mmBottom Border 55mmWeight (kg) 12.00Top Border 450mm -
In Stock 99£510.00 £425.00
Extending its full line of revolutionary laser projectors, the world’s No.1 DLP brand BenQ presents LU960ST, especially designed for short throw fixed lens installation and reserves installation flexibility to merge into limited space.
Zero-deviation alignment of laser diodes boosts luminous flux into the light tunnel, improving light efficacy to 5,500 ANSI lumens.
Superior Dustproofing for Severe Conditions with IP5X Certification
BenQ laser projectors are designed with sealed laser modules and enclosed light engines to protect the DMD chip, color wheel sensor, laser package, and other optical components. This lock-and-key design hermetically seals the engine from dust to prolong projector lifespan.
Anti-Dust Accumulation Sensor to Resist Dust Buildup
Incorporating a color wheel sensor with an ingenious anti-dust buildup features, BenQ LU960ST prolongs optimal performance by repelling dust that can accumulate on traditional sensor to block the IR signal and cause flickering, abnormal colors, or even shutdown.
24/7 Operation
BenQ laser light source supports continuous 24/7 operation and is suitable for public display applications in museums and exhibitions. Users can choose from three different light source modes to optimize energy consumption and delivers up to 70,000 hours under Dimming Mode.
Fast Mode Provide the Most In-time Visual Feedback for Your Simulator
System latency, which is the lag between the time an operator applies an input and the simulator responds to provide both visual and motion cues, is inevitable in simulators. As a part of visual systems in simulators and based on expertise gained from experience with near-zero latency displays used in gaming, LU960ST employs a Fast Mode to provide latency as low as 16.67ms*(@WUXGA 60Hz).
Cinematic Grade 92% Rec.709 Color Coverage for Optimal Color Performance
LU960ST’s powerful laser projection utilizes a dual color wheel system to produce unparalleled color performance that achieves a 92% Rec.709 color coverage. By increasing color ratios and the purity of RGBY color, LU960ST dramatically enhances color saturation to ensure superior presentation quality.
White Balance Calibration for Seamless Edge Blending
BenQ exclusive white balance adjustments can reduce white balance variables between images projected from different projectors to such a low level that the most people cannot see any difference. This allows for seamless and accurate picture quality without disruptive discrepancies.
Ensure Consistent Brightness Blending with Custom Light Mode
Custom Light Mode modulates light power output from 25% to 100% at a 1% rate, optimizing the projected image in a variety of ambient lighting situations. It is especially useful for blending consistent brightness across multiple projections.
360° and Portrait Projection Accommodate Different Spaces
Laser technology guarantees reliable projection from any angle. Dynamic installation options such as 360° rotation and portrait applications, allows projection onto ceiling, walls, floors or angled signage.
Lens Lock & Metal Lens Barrel
Most of the simulation solutions use several projectors doing blending to create a panoramic view. The Lens Lock can fix the final position, focus and zoom of the lens, avoiding the readjustment effort if any mistouching. In addition, the metal barrel lens helps the zoom and focus adjustment to be more stable and accurate comparing with plastic lens.
DMS Local Offers Centralized Control Over Multiple Displays
For users who would like to control all their displays remotely via LAN, you can download and install the DMS Local software for your system. DMS Local is a Device Information and Management software for use in the Windows operating system. DMS Local also supports Agent Mode which allows you to integrate your DMS Local settings to the cloud-based DMS Cloud.
Network/Web Control
BenQ laser projectors are compatible with Creston, AMX and PJ Link control systems for convenient system integration with various third-party components and reduced cost to centrally maintain multiple projectors.
HDBaseT for Uncompressed Transmission Up to 100m and Control
Groundbreaking HDBaseT connectivity combines video, audio, RS-232 and LAN signal control signals from multiple sources including: PCs, laptops, document cameras, Blu-ray and DVDs onto a single RJ-45 cable. This ensures seamless transmissions up to 100 meters.
| Item | 9H.JN577.25E |
|---|---|
| Weight (kg) | 12.000000 |
| EAN | 4718755084041 |
| Technology | DLP |
| HDMI Inputs | 2 |
| Contrast | 3,000,000 |
| Lumens | 5500 |
| Throw Ratio | 0.77-0.84 |
| Resolution (Native) | WUXGA 1920x1200 |
| Light Source | Laser |
| Light Source Life (Est.) | 70000 |
| Short Description |
|
Delivery Rates to mainland UK - (excluding large and/or heavy items)
Delivery is to ground floor, if you have special delivery instructions you must contact us to ensure that we can have the best chance of success in delivering the item. We required items to be signed for.
Working Delivery dates are Monday to Friday unless Saturday delivery is selected.
- 7-10 Working Days delivery is free of charge
- 2-3 Working Days £8 + VAT
- Next Working Day £12 + VAT - if ordered before cut off
- Working Day Pre-Noon £35 + VAT - Be careful choosing this option, it has the highest incidence of failure with all couriers.
Delivery cut off is 4pm on most items - earlier time exceptions are large items, high value items, items requiring a pallet (i.e bulk orders). If you order after 4pm then the order is processed the next day, that means if you ordered Tuesday at 8pm at night, the next day delivery option is Thursday as the order is processed on the Wednesday.
Delivery Rates to non-mainland UK + Eire - (excluding large screens and Touch Screens)
Non Mainland and the Highlands and Islands- this includes the Isle of Wight, any thing that goes over water that does not have road access. These rates are determined by couriers based on postcode. If there are multiple items then we may need to quote you for delivery.
2-3 Days £45 + VAT
Large Screens 3m+ wide & Touch Screen
By Quotation - they might not be able to be next day as specialised couriers are often required.
Returns
Faulty Items
Goods Reported Faulty Within 28 Days of Receipt.
If you have a faulty item and are reporting the fault within 28 days of receipt (please note that for business customers, this is 14 days). When the goods are returned to us complete, we’ll issue a full refund to you via your original payment method.We will try and ensure that there is a fault, that often requires is running diagnostics or getting the manufacturer to speak to you directly to determine whether there is a genuine fault rather than just a set up error.
Goods Damaged in Transit.
If your goods were damaged in transit it must be reported to us within 3 days. If goods are visibly damaged on receipt the delivery note must be marked accordingly. Once the damaged goods have been collected and received back into our warehouse, we’ll issue a refund via your original payment method. We will require pictures of the damage.
Consumers - If You Have Changed Your Mind – this is for personal use not business or organisations
If you are a private consumer and have changed your mind as long as the goods have not been in your possession for over 14 days, and the item can be sold again as new, then you are entitled to return the goods to us. If the item you are returning is a Projector, the lamp hours used must not have exceeded 3 hours otherwise a restocking fee will be applied. The cost of returning items is the responsibility of the customer. As new means in original packaging with complete accessory packs and manuals. If any item is marked/damaged, including the packing, there may be a restocking fee. Please contact us directly before sending any goods back to obtain an RMA number without this there may be a delay in dealing with your return. If you purchased for a company, or an organisation you are not deemed a Consumer by law.
About Laser Projectors
In the last few years the amount of laser projectors available has increased exponentially, largely due to the increased lifespan and decreasing cost of them. A laser projector can last for up to 20,000-30,000 hours before it reaches 50% brightness, and while you can't replace the laser unit once that runs out it is highly unlikely that it ever will run out. The fact that they last for so long without any maintenance makes them ideal not only for smaller rooms but especially for large venues where it is very tricky to gain access to the projector to replace the (expensive) lamp.
It is important to note that when we refer to a laser projector this means the light source of the projector, it can still be LCD or DLP and have a laser light source because LCD/DLP refers to the technology with which the projector produces the colours. Also not to be confused with LED projectors, which have the benefits of the longevity you get with a laser projector but generally they are nowhere near as bright.
Another benefit of most laser projectors is that they can be pointed at any angle, so if you have a situation where the projector needs to be placed on its side, point directly up or point directly down, you can do this with the peace of mind that the projector will not break, unlike most lamp-based ones.
If you are still unsure what type of projector is best for you then why not give us a call on 01256 882629 for advice from our expert sales team.
Other suitable alternatives
-
In Stock 1Special Price £3,243.60 £2,703.00 Regular Price £3,511.20 £2,926.00BenQ LU935ST ProjectorIn stockResolution (Native) WUXGA 1920x1200Lumens 5500Throw Ratio 0.81-0.89Technology DLPLight Source Life (Est.) 20000Weight (kg) 7.00 -
In Stock 4£3,114.00 £2,595.00ViewSonic LS921WU ProjectorIn stockResolution (Native) WUXGA 1920x1200Lumens 6000Throw Ratio 0.81-0.89Technology DLPLight Source Life (Est.) 20000Weight (kg) 6.50
About Just Projectors
We provide advice on the phone listening to your requirements we are able to help you get the right one as we have trained staff . We have a network of installers to cover your area. On higher end models we can arrange a loan or demo. We think most people should buy HD resolution , they are so affordable now and you wouldn't buy a 5 year old laptop so why buy SVGA which is over 20 years old. Yes XGA & WXGA are ideal for simple presentations and education use but we have all been use to decent home TV's or high resolution phones or tablets so why put a huge image on the wall/screen which is inferior. There are some great brands out there like BenQ, ViewSonic, Epson, Sony and less known ones like EIKI or Vivitek. Yes you can buy the wrong one, this is why we still offer advice rather than just an add to cart website. We have a price promise, we see the models, we often put one against another and see which one is best. We only buy UK stock, which has higher warranty standards to ensure you get real value for money. We don't sell the cheap brands as the lumens aren't verified. Look at our name it tells you that we are committed to this product and we have a great reputation in the market place for price and customer service. We supply the UK but also in Ireland, we offer a 1-3 day service to Ireland.